| 1. | Development of deformation processed copper base in - situ composites
形变铜基原位复合材料的研究现状及展望 |
| 2. | Analysis and optimization of drawing deformation process based on numerical simulation
基于数值模拟的拔伸成形工艺分析与优化 |
| 3. | Natural clays have their structure which must be destroyed during the deformation process
天然粘土一般都具有结构性，其变形过程必然伴随着结构的破坏。 |
| 4. | Simulation of polyurethane pre - compressing seal deformation process in high - pressure tube - testing press with finite element method
高压水压试管机轴向预压紧密封变形过程有限元仿真 |
| 5. | The stability in a plastic deformation is a key factor determing success or failure of various kind of deformation process
摘要塑性变形过程中的稳定性是决定各类变形工序成败的关键。 |
| 6. | The whole deformation process of the bird bodies and windshield glass are recorded using the high - speed camera and the vidicon
采用高速摄影和高速摄像拍摄了鸟体和风挡玻璃的变形全过程。 |
| 7. | Meanwhile , the ansys software of fem is applied for numerical analysis to rock mass deformation process on dam abutment
同时，采用ansys有限元分析软件对坝肩岩体变形过程进行了数值模拟分析。 |
| 8. | A void growth equation is derived for elastic - plastic deformation process by means of representative volume element ( rve )
摘要采用体胞模型的分析方法推导了材料在弹塑性变形阶段的孔洞增长方程。 |
| 9. | Three - dimensional finite element modeling ( fem ) was introduced to calculate the stress distribution and deformation process during indenting
采用三维有限元模型计算了纳米压头压入过程中ti - dlc膜的应力分布和变形过程。 |
| 10. | The main objective of this paper is to predict this complete load - deformation process for none - hinge cfst arches using numerical techniques
本文的主要目的是采用数值方法对圆管截面无铰拱从加载直至极限承载力的受力-变形关系进行全过程分析。 |
